Philips 107H Electronic User'S Manual Download Page 32

Page: 32 / 112

Frequently Asked Questions

●

Check that the cable is attached correctly to the computer.

●

Press any key on the keyboard to wake-up the computer from power saving mode.

44. Why is there no picture on my monitor even though the power LED is green?

●

Verify the Contrast and Brightness setting of the monitor. First press and hold the

(-) button to

increase Contrast and then press and hold the

(+) button to increase Brightness. These

buttons are located on the front of your monitor.

●

Press both the

(-) button and the OK button at the same time to switch input A|B.

●

Try and repeat step 48 above.

45. Why does the picture disappear after I press the on/off button quickly?

This is a unique Philips feature designed to preserve the life of your monitor. Please allow 5 seconds
between powering off and on your monitor, your picture will then be restored.

file:///D|/EDFU/crt_17_6/edoc/english/FAQ.HTM (13 of 13)2005-04-08 ¤W¤È 11:25:59

Summary of Contents for 107H

















































































































Search results

Summary of Contents for 107H

Reviews:

Related manuals for 107H

Brands by name

Popular brands

Philips 107H, Electronic User'S Manual

Search results

Summary of Contents for 107H

Reviews:

Related manuals for 107H

Brands by name

Popular brands