Philips 107H Electronic User'S Manual Download Page 76

Page: 76 / 112

The OSD Controls

10) Press the

button to return to the MAIN CONTROLS window, or press the

button until

ROTATE IMAGE is highlighted.

ROTATE IMAGE

(Not available in all models)

ROTATE IMAGE under ADJUST SHAPE allows you to adjust one of the five preset options. These
two options are PINCUSHION and BALANCED pincushion. Note: use this feature only when the
picture is not square.

1) Press the

button on the monitor. The MAIN CONTROLS window appears.

2) Press the

button until ADJUST SHAPE is highlighted.

3) Press the

button. The ADJUST SHAPE window appears. ADJUST SIDE CURVE should be

highlighted.

4) Press the

button until ROTATE IMAGE is highlighted.

file:///D|/EDFU/crt_17_6/edoc/english/OSD_2/osd_cont.htm (14 of 24)2005-04-08 ¤W¤È 11:26:24

Summary of Contents for 107H

















































































































Search results

Summary of Contents for 107H

Reviews:

Related manuals for 107H

Brands by name

Popular brands

Philips 107H, Electronic User'S Manual

Search results

Summary of Contents for 107H

Reviews:

Related manuals for 107H

Brands by name

Popular brands