manualshive.com logo in svg

PHILIPS Respironics OmniLab Advanced +, Clinical Manual, Page: 45 / 52

Share
Download
PHILIPS Respironics OmniLab Advanced + Clinical Manual Download Page 45

41

Section 9:  Technical Specifications

Environmental

Operating

Storage

Temperature

5° C to 40° C (41° F to 104° F)

-20° C to 60° C (-4° F to 140° F)

Relative Humidity

15 to 95% (non-condensing)

15 to 95% (non-condensing)

Atmospheric Pressure

101 kPa to 77 kPa

(approximately 0-2286 m/0-7500 ft)

n/a

Physical

 

Dimensions: 

22.23 cm W x 18.42 cm L  x 10.80 cm H 

 

 

 

(8.75” W x 7.25” L  x 4.25” H) 

 

Weight:    

Approximately 2 kg (4.4 lbs)

Standards Compliance

This device is designed to conform to the following standards:

•   IEC 60601-1: Medical Electrical Equipment – Part 1: General Requirements for Basic Safety and Essential Performance
•   IEC 60601-1-2: Medical Electrical Equipment – Part 1-2: General Requirements for Basic Safety and Essential Performance – 

Collateral standard: Electromagnetic compatibility - Requirements and tests

•   IEC 60601-1-6: Medical Electrical Equipment – Part 1-6: General Requirements for Safety and Essential Performance – Collateral 

standard: Usability

•   IEC 60601-1-8: Medical Electrical Equipment – Part 1-8: General Requirements for Basic Safety and Essential Performance – Collateral 

standard: General Requirements, tests and guidance for alarm systems in medical electrical equipment and medical electrical systems

•   IEC 60601-1-11: Medical Electrical Equipment – Part 1-11: General Requirements for Basic Safety and Essential Performance – Collateral 

standard: Requirements for medical electrical equipment and medical electrical systems used in the home healthcare environment

•   ISO 10651-6: Lung Ventilators for Medical Use – Particular Requirements for Basic Safety and Essential Performance, Part 6. Home 

care ventilatory support devices

•   RTCA DO-160F Section 21, Category M; Emission of Radio Frequency Energy

Electrical

 

AC Voltage Source:   

 

 

 

100 to 240 VAC, 50/60 Hz, 1.2 A

 

DC Power Source:

 

 

12 VDC, 5.0 A (External Battery)

 

 

24 VDC, 4.2 A (Power Supply)

 

Type of Protection Against Electric Shock: 

 

 

Class II  (To be used with external Class II power supply only) 

 

Degree of Protection Against Electric Shock: 

 

 

Type BF Applied Part

 

Degree of Protection against Ingress of Water:  

 

 

Drip Proof, IP22

 

Mode of Operation: 

  Continuous

SD Card and SD Card Reader

Use only SD cards and SD card readers available from Philips Respironics, including the following:

 

SanDisk ® Card Reader/Writer - SanDisk ImageMate - REF SDDR-99-A15

Summary of Contents for OmniLab Advanced +





















































Reviews:

No comments