5
Removing the Mask
Keep your adjustments! Easily remove the mask by grabbing the headgear back
strap
J
and slide the headgear forward over your head.
Disassembly
1.
Cushion: Grasp the pillows cushion platform
C
and peel from elbow
D
.
Caution:
Do not pull on the pillows cushion tips
A
to remove from elbow
D
.
2.
Elbow: Pull from frame
H
.
Caution:
The elbow
D
, tube
F
, and swivel
G
are permanently attached. Do not
attempt to separate the elbow or swivel from the tube.
Caution:
Do not pull on mask tube
F
to separate from CPAP tubing.
3.
Frame: Undo the frame tabs
I
and pull through the slots in the headgear.
Assembly
Note:
The correct position for the elbow
D
, retaining ring
E
, and cushion
platform
C
is to point down (
)
.
1.
Elbow: Press into the retaining ring
until all sides are flush.
2.
Cushion: Push onto the back of the elbow
.
Note:
The elbow, frame and cushion will fit tightly together without any gaps
. If there are gaps or the cushion angle is low
remove the cushion and
reattach. The cushion should fit securely on the elbow with the pillows at an
angle towards the nose
.
3.
Frame: Position the frame with the retaining ring
E
pointing down (
).
4.
Headgear: Position the tube management loop
L
on top.
5.
Slide the frame tabs through the headgear slots and fold forward.
Note:
The Philips Respironics logo is on the outside of the headgear back strap
J
when correctly assembled.
Philips Respironics System One Resistance Control
Your mask when combined with a Philips Respironics System One device, provides
optimal resistance compensation. This value is identified below and should be set
by your provider.
Size
Setting
S, M, L
X2
Summary of Contents for Nuance
