Philips AVENT AVENT SCF870, User Manual

Page: 8 / 156

- Do not use the appliance if it has fallen or is damaged in any way.
Take it to an authorised Philips service centre for repair.
- Never use the steaming function without water.
- Make sure that you do not overfill the water tank (max. 200ml).
Do not exceed the maximum level indicated on the measuring cup.
- When you steam ingredients, make sure that you do not overfill the
jar. Make sure that the top edge of the green blade unit is not covered
with food (Fig. 2).
- When you blend liquids, do not exceed the maximum level indicated
on the jar (450ml).
- Do not lift and move the appliance while it is operating.
- Do not insert any object into the filling opening or the steam outlet.
- Never refill the water tank during the steaming process, as hot water
and steam may come out of the appliance as a result.
- Always make sure that the lid has cooled down after steaming before
you open it to add more ingredients for blending, if necessary.
- Never connect this appliance to a timer switch or remote control
system in order to avoid a hazardous situation.
- Always check the temperature of the baby food on the back of your hand
before you feed your baby.
- Always check the consistency of the baby food. Make sure there are
no chunks in the food.
- When the steaming process (max. 20 minutes) is finished, do not steam
or reheat the baby food again.
- Only use the spatula supplied to take the food out of the jar.
- Regular descaling prevents damage to the appliance.
- Noise level: Lc= 89 dB(A).
Safety system
The appliance is equipped with a built-in safety lock. The appliance only functions if you have
properly assembled all parts on the motor unit. If all parts are assembled correctly, the built-in safety
lock will be unlocked.
The appliance is also equipped with overheat protection. Overheating could occur if the time
between two steaming processes is too short, if the blending function is used too long or if there
are too much ingredients in the jar. If the overheat protection switches off the appliance during
use, set the control knob to 0 and let the appliance cool down for a few minutes. After this, you can
use the appliance again.
Electromagnetic fields (EMF)
This Philips appliance complies with all applicable standards and regulations regarding exposure to
electromagnetic fields.
ENGLISH
8