Troubleshooting
Symptom
Cause of Failure
Recommendation
The switch
on/off
function not
working and
LED off
1.
Battery is running
out of power
2.
Wrong function
mode
1.
Charging the battery by
Micro USB.
2.
Pointing the arrowhead to
area B and press the
touch button.
3.
If the device still can
work, don’t open up the
Switch and send it for
repair.
Can not
adjust the
percentage
of dimmer
1.
The device may not
be placed upright.
2.
The device is in off
state.
1.
Check if the device is
placed upright.
2.
Rotating to the
percentage you want
then press touch button.
Or pointing the
arrowhead to area B and
press the touch button to
turn the lamp on then
adjust the percentage.
The device
can not join
to Z-Wave
network
1.
The device may in a
Z-Wave network.
2.
The arrowhead
points to wrong
area.
1.
Exclude the device then
include again.
2.
Pointing the arrowhead to
area A then include
again.
Button no
response
1.
The button will no
response when LED
is flashing.
Wait for the LED go out and
try again.
Specification
Operating Voltage
3.7 V (Lithium Polymer Battery)
Low Battery Voltage
3.6 V
Battery Charge Voltage 5 Vdc @ Micro USB Port
RF Range
Minimum 40 m in door, 100m outdoor line
of sight
Operating Temperature -10°C ~ 45°C
Frequency Range
PSR07 (EU): 868.40MHz; 869.85MHz(EU)
PSR07 (US): 908.40MHz;
916.00MHz(USA/Canada) /
PSR07 (TW/JP): 922.5MHz/ 923.9MHz/
926.3MHz (Taiwan/JP)
RF Maximum Power
+5dBm
** Specifications are subject to change and improvement without
notice.