Configuration
NO. Name
Size
(Byte)
Def.
Valid
Values
Description
1
Basic Set
OFF level
1
0x00
0x00~0x63
Control the value represented
by the left-side in area D.
E.g. Setting this configuration
to 0x0F means range of
Command Basic Set value
start from 0x0F
2
Basic Set
ON level
1
0x63
0x00~0x63
Control the value represented
by the right-side in area D.
E.g. Setting this configuration
to 0x1E means range of
Command Basic Set value
start from 0x1E
10
Auto
Report
Battery
Time
1
12
1~127
The interval time for auto
reporting the Battery level. 0
means turn off auto report
battery.
The default value is 12.
25
Dimmer
Set
Method
1
0x00
0x00,0x01
Dimmer setting method.
0 : Auto send Command
Basic Set after rotating.
1 : Send Command Basic Set
by touching key after rotating
Installation
1. Fix the bracket on the wall.
2. There's a magnet on the backside of this device. It can stick to the
bracket.
Notice: Do not install the bracket on unstable wall, this may
cause miscarriage to control lights.
Firmware update over the air (OTA)
This device supports the Z-Wave firmware update via OTA. Let the
controller into the firmware update mode, and rotate to area A then
touch the button once to start update. After finish the firmware
download, the red LED will start to flash every 0.5 second. Please
don't remove the battery before the LED stop flashing.
Notice: recommend using OTA when the device is charging.
Supported Z-Wave Command Classes
* COMMAND_CLASS_ZWAVEPLUS_INFO_V2
* COMMAND_CLASS_BATTERY
* COMMAND_CLASS_CENTRAL_SCENE_V1
* COMMAND_CLASS_VERSION_V2
* COMMAND_CLASS_MANUFACTURER_SPECIFIC_V2
* COMMAND_CLASS_DEVICE_RESET_LOCALLY
* COMMAND_CLASS_ASSOCIATION_V2
* COMMAND_CLASS_WAKE_UP_V2
* COMMAND_CLASS_ASSOCIATION_GRP_INFO
* COMMAND_CLASS_POWERLEVEL
* COMMAND_CLASS_MULTI_CMD
* COMMAND_CLASS_SECURITY
* COMMAND_CLASS_FIRMWARE_UPDATE_MD_V2
* COMMAND_CLASS_CONFIGURATION
Security Network
The device support the security function. When the device included
with a security controller, the device will auto switch to the security
mode. In the security mode, the follow commands need using
Security CC wrapped to communicate, otherwise it will not response.
COMMAND_CLASS_BATTERY
COMMAND_CLASS_ASSOCIATION_V2
COMMAND_CLASS_CONFIGURATION
COMMAND_CLASS_WAKE_UP_V2
COMMAND_CLASS_CENTRAL_SCENE