N
O.
Name
Def
.
Valid
Description
1
Basic Set
Level
0x
FF
All
Setting the BASIC command value
to turn on the light. The 0xFF(-1)
means turn on the light. For
dimmer equipment 1 to 100 means
the light strength.
0 means turn off the light.
Caution
: The value is unsigned
byte, the range is from 0x00 ~
0xFF.
3
(*)
PIR
Sensitivity
80
0 ~ 99
PIR sensitivity settings.
0 means disable the PIR motion.
1 means the lowest sensitivity,
99 means the highest sensitivity.
High sensitivity means can
detected long distance, but if there
is more noise signal in the
environment, it will re-trigger too
frequency.
4 LightSensor
Threshold
line 1
1
1 ~ 100 Setting the illumination threshold to
turn on the light. When the event
triggered and the environment
illumination lower then the
threshold, the device will turn on
the light.
0 means turn off illumination
detected function. And never turn
on the light.
1 means darkest. (100Lux)
99 means brightest.
100 means turn off illumination
N
O.
Name
Def
.
Valid
Description
detected function. And always turn
on the light.
Notice:
In none test mode, only the
value in 1 to 99 will enable the
illumination detected function and
update the illumination value.
5
LightSensor
Threshold
line 2
2
1 ~ 100
0 means turn off illumination
detected function. And never turn
on the light.
1 means darkest. (200Lux)
99 means brightest.
100 means turn off illumination
detected function. And always turn
on the light.
6
LightSensor
Threshold
line 3
3
1 ~ 100
0 means turn off illumination
detected function. And never turn
on the light.
1 means darkest. (300Lux)
99 means brightest.
100 means turn off illumination
detected function. And always turn
on the light.
7 LightSensor
Threshold
line 4
4
1 ~ 100 0 means turn off illumination
detected function. And never turn
on the light.
1 means darkest. (400Lux)
99 means brightest.
100 means turn off illumination
6
