09
Receiver Connections
3
3.3 Connection to Dish and
TV via SCART
Connect the SCART lead supplied to the
SCART socket on back of receiver
marked
TV
and to either of the SCART
sockets on the back of the TV marked
AV1
or
AV2
3.2 Connection to Dish and TV via Composite Video or S-VHS for SD viewing
Connect a 3 phono lead (not supplied) to
the
VIDEO
,
L
&
R
phono sockets on
the back of the receiver and to
corresponding Phono sockets on the
back of your TV.
Alternatively use an S-Video lead (not
supplied) to connect the
S-VIDEO
socket
on your receiver to the
S-VIDEO IN
socket
on your TV and use a 2 phono to 2 phono
lead (not supplied) to carry a stereo audio
signal from the phono sockets marked
L
R
on your receiver to those marked
AUDIO IN
L
R
on your TV.
3.4 Power Connection
Your satellite receiver is mains powered,
insert the 3 pin plug into a standard UK 240V
socket and switch on the socket and switch
on the receiver using the switch shown below.
On/Off Switch
Note:
Composite video will provide only
standard definition output at 576i. Set the
video output mode to RGB (for SCART
connection) or CVBS (for composite video
connection) by pressing the ‘OUTPUT’ button
on the remote control unit.
Customer Careline:
08457 573479
Local Rate - UK only
Technical Support: www.philex.com/support
