Philco PLS 1061, User Manual

Page: 25 / 96

EN - 23
02/2011 Copyright © 2011, Fast ČR, a. s.
PART 8: AUTOMATIC MALFUNCTION DETECTION SYSTEM
Your washing machine is equipped with a system, which during the washing process continually monitors the
correct progress and in the case of any malfunction takes the necessary remedy measures and will at the same
time inform you about the malfunction.
MALFUNCTION CODE INDICATORS POSSIBLE CAUSE POSSIBLE REMEDY
E01
Indicator light
1 and 2 start
to fl ash.
The washing machine door is
not properly shut.
Close the door properly
until you hear a click. If the
problem continues, turn off
the washing machine
disconnect it from
the power socket and
immediately contact the
nearest authorised service
centre.
E02
Indicator light
1 and 3 start
to fl ash.
The water level in the washing
machine is under the heating
element. Maybe the water
supply pressure is low or
blocked.
Fully open the water inlet.
Maybe the municipal
water supply has been
interrupted, check it. If
the problem persists, the
washing machine will
turn itself off after a while.
Disconnect it from the
power socket, shut off the
water inlet and contact
your nearest authorised
service centre.
E03
Indicator light
1 and 4 start
to fl ash.
A pump malfunction or the
pump fi lter is clogged.
Clean out the pump fi lter.
If the problem persists,
contact your nearest
authorised service centre.
(*)
E04
Indicator light
2 and 3 start
to fl ash.
There is an excessive amount of
water in the washing machine.
The washing machine
will automatically drain
this water. After the water
has been drained, turn
off the washing machine
and disconnect it from the
power socket. Shut off the
water inlet and contact
your nearest authorised
service centre.
(*) See chapter referring to cleaning and maintenance.
PART 8: AUTOMATIC MALFUNCTION DETECTION SYSTEM