Philco PLDSI 148 A KING, Owner'S Manual

Page: 28 / 104

Copyright © 2020, Fast ČR, a. s. Revision 08/2022
EN - 26
p
Trouble Shooting
Whenever there is a problem with the appliance, check if you can solve it following the tables below.
If the problem persists, please contact the customer service.
Description Possible cause Solution
Appliance does not
start.
Door is not closed properly.
Clothes are stuck.
Close the door properly and restart.
Check the laundry.
Door can´t be opened. Safety protection is activated. Disconnect the power and restart.
Water leakage. Connections are not tight enough.
Check and fasten the water inlet pipe.
Check and clean the outlet hose.
Detergent residues
in the detergent
dispenser.
Detergent is damp and/or clotted.
Clean and wipe the detergent dispenser
dry.
Indicator or display
does not work.
PC board or harness have connection
problems.
Switch off the power and check if the
mains plug is connected properly.
Abnormal noise.
Fixing bolts still in place.
Floor is not solid or level.
Check if the fixing bolts have been
removed
Make sure the appliance is installed on a
solid and level floor.
Error Codes
Description Possible cause Solution
Door is not closed properly. Close the door properly and restart.
Water injecting problem during wash
cycle.
Check if the water pressure is high
enough.
Straighten the water pipe.
Clean the inlet valve filter.
Overtime water draining. Check the drain hose for blockage.
Water overflow. Restart the appliance.
Others.
Restart the appliance. If problem
persists, please contact the customer
service.