Philco PLDSI 148 A KING, Owner'S Manual

Page: 11 / 104

Copyright © 2020, Fast ČR, a. s. Revision 08/2022
EN - 9
Levelling the washing machine
！
Warning!
• The lock nuts on all four feet must be screwed tightly against the housing.
1. Loosen the lock nut.
2. Turn the foot until it reaches the floor.
3. Adjust the legs and lock the nuts with a spanner. Make sure the machine is level and steady.
Connect the water supply hose
！
Warning!
To prevent leakage or water damage, follow the instructions in this chapter.
• Do not kink, crush or modify water inlet hose.
Connect the inlet pipe as indicated, There are two ways to connect the inlet pipe.
1. Connection between ordinary tap and inlet hose.
Connect the water supply hose to
the water inlet valve and a water
tap with cold water as indicated.
Note!
• Connect manually, do not use tools. Check if the connections are tight.
Drain Hose
！
Warning!
• Do not kink or protract the drain hose.
• Position drain hose properly ,otherwise damage might result of water leakage.