background image

EN

1

5

Auto Shutdown Protection

Auto shut down is a safety protection function for your induction hob. It shut down
automatically if ever you forget to turn off induction hob. The default working times for
various power levels are shown in the below table:

Power level

1~3

4~6

7~8

9

Default working timer

(min)

360

180

120

90

When the pot is removed, the induction hob can stop heating immediately and the hob
automatically switch off after 2 minutes.

Using the Timer

You can use the timer in two different ways:

1. You can use it as a minute minder. In this case, the timer will not turn any cooking zone

off when the set time is up.

2. You can set it to turn one cooking zone off after the set time is up.

3. You can set the timer for up to 99 minutes.

Using the Timer as a Minute Minder

If you are not selecting any cooking zone

Make sure the cooktop is turned on.
Note: you can use the minute minder even if you are not selecting any cooking zone.
Touch the Timer key(F). The minder indicator will start flashing"10",and you can  set
the timer at this point.

Using the “+” or “-” buttons, you can realize the setting of timing from 1 to  99
minutes.
Hint: Touch the “-” or “+” control of the timer once to decrease or increase by  1
minute. Touch and hold the “-” or “+” control of the timer to decrease or increase  by
10 minutes.
Set the time or power level to 0, the timer is canceled, and the timer indicator will
turn off.
When the time is set, it will begin to count down immediately. The display will  show
the remaining time.
Buzzer will bips for 30 seconds and the timer indicator will turn off when the  setting
time finished.

minute minder only works at normal model.

Summary of Contents for PH2740IC

























Reviews: