9
indirectly through heating the glass surface. The glass becomes hot only because the
pan eventually warms it up.
2.4 Before using your New Induction Hob
Read this guide, taking special note of the ‘Safety Warnings’ section.
Remove any protective film that may still be on your Induction hob.
2.5 Technical Specification
Cooking Hob
PH2313IC
Cooking Zones
2 Zones
Supply Voltage
220-240V~ 50 or 60Hz
Total Rated Power
W
3500
Product Size L×W×H(mm)
288X520X56
Built-in Dimensions A×B (mm)
268X500
3. Operation of Product
3.1 Touch Controls
The controls respond to touch, so you don’t need to apply any pressure.
Use the ball of your finger, not its tip.
You will hear a beep each time a touch is registered.
Make sure the controls are always clean, dry, and that there is no object (e.g. a
utensil or a cloth) covering them. Even a thin film of water may make the controls
difficult to operate.
iron pot
magnetic circuit
ceramic glass plate
induction coil
induced currents
