background image

EN - 29

 03/2015

Copyright © 2015, Fast ČR, a. s.

PART 8: TROUBLESHOOTING GUIDE

The appliance may only be repaired by an authorised service center.
Before calling the authorised service center, check whether you can remedy the problem yourself by reading 
the instructions or proceeding according to the operating instruction.
You may be charged repair fees even within the scope of a valid warranty.

Error codes

Error codes

Description

Possible case

E1

Door is open

Door is open while the appliance is running.

E2

Water inlet valve.

Water inlet valve malfunction.

E3

Water drainage.

Water drainage malfunction

E4

Temperature sensor

Temperature sensor malfunction

E5

Overfl ow/leakage

Overfl ow occurs/Water leakage occurs

E6

Water leakage

Water leakage occurs

E7

Heating element

Abnormal heating

Troubleshooting

Problem

Possible cause

What to do…

Dishwasher does 
not turn on.

Fuse is blown or circuit 
breaker off .

Replace the fuse or reset the circuit breaker. Remove all 
appliances sharing the same circuit with dishwasher.

Power button was not 
pressed.

Press the Power button and ensure the door is closed. 
Make sure the power cord is correctly plugged into the 
power socket.

Low water pressure

Check the water supply is connected properly and 
water inlet valve is open.

Drain pump does 
not stop.

Overfl ow

The system is designed to detect an overfl ow. When it 
does, it shuts off  the circulation pump and turns on the 
drain pump.

Noise

Some audible
sounds are normal

Sound from detergent cup opening.

Dishes are not properly 
loaded.

To ensure everything is secured in the dishwasher.

Motor hums.

Dishwasher has not been used regularly. If you do not 
use it often, remember to set it to fi ll and pump out 
every week, which will help keep the seal moist.

Suds in the tub

Improper detergent

Use only the special dishwasher detergent to avoid 
suds. If this occurs, open the dishwasher and let suds 
evaporate. Add 1 gallon of cold water to the tub. Close 
and latch the dishwasher, then start the „pre-rinse“ 
wash cycle to drain out the water... Repeat if necessary.

Stained tub interior

Detergent with colorant 
was used

Make sure that the detergent is the one without 
colorant.

Summary of Contents for PDP 4 WH





































Reviews: