EN - 10
03/2015
Copyright © 2015, Fast ČR, a. s.
PART 3: INSTALLATION
Warning
Keep this instruction manual in a safe place for future reference. If the appliance is sold, given away or
moved, please ensure the manual is kept with the machine, so that the new owner may benefi t from the
advice contained within it.
Please read this instruction manual carefully: it contains important information regarding the safe
installation, use and maintenance of the appliance.
If the appliance must be moved at any time, keep it in an upright position; if absolutely necessary, it may be
tilted onto its back.
Unpacking
Remove the external packaging, remove the protective plastic fi lm from the surface of the appliance (if used)
and clean the external parts of the appliance with an agent designed for this purpose. Do not use steel wool or
any coarse agents, which could irreparably damage the surface of the appliance. Carefully remove all papers
and adhesive tape from the appliance, door and other parts packed in polystyrene. Remove documents and
accessories from inside the appliance.
The packaging material is recyclable and is marked with a recycling symbol. For disposal, follow the local
regulations. Packaging materials (plastic bags, polystyrene parts, etc.) must be kept out of the reach of children,
because they present a possible source of danger.
Carefully inspect the appliance. If you discover any faults, stop the installation and contact the vendor.
Installation location of the appliance
When selecting the installation location, select a place where it will be easy to load and unload the dishes.
Do not install the dishwasher in a room where the room temperature may fall below 0°C.
Prior to installation, take all packaging materials off the dishwasher and dispose of them properly. Locate
the dishwasher near a water supply and drain connection. You need to take into consideration all possible
connections that cannot be arbitrarily changed.
Do not hold the dishwasher by the door or control panel when placing it.
Leave suffi
cient space on both sides of the dishwasher so that it can be comfortably pulled out and then slid
back into position for cleaning purposes.
Check that there are no water supply or drain hoses crimped during the installation. Also make sure that the
appliance is not standing on the power cord.
Level the appliance using the levelling feet. Correct positioning of the appliance will ensure problem-free
opening and closing of the door.
If the dishwasher door cannot be properly closed, check that the appliance is located on an even fl oor; level
the appliance using the adjustable feet.
Position the dishwasher on a level and sturdy fl oor. If the fl oor is uneven, the front feet of the appliance may
be adjusted until it reaches a horizontal position (the angle of inclination must not exceed 2 degrees). If the
appliance is levelled correctly, it will be more stable and much less likely to move or cause vibrations and noise
while it is operation.
