Philco PD 1046 ET, Owner'S Manual

Page: 9 / 132

Copyright © 2020, Fast ČR, a. s. Revision 12/2021
EN - 7
WARNING!
Use the new water inlet hose supplied with your machine, do not use an old machine’s hose.
WARNING!
Run water through the new hose before connecting.
WARNING!
Connect the hose directly to the water inlet tap. The pressure supplied by the tap should be a minimum
of 0.03 MPa and a maximum of 1 MPa. If the pressure exceeds 1 MPa, a pressure relief valve must be fitted
between the connection.
WARNING!
After the connections are made, turn the tap on fully and check for water leaks. Always turn off the water
inlet tap after a wash program has finished.
An Aquastop water spout is available with some models. Do not damage it or allow it to become kinked or
twisted.
Electrical connection
WARNING!
Your machine is set to operate at 220-240 V. If the mains voltage supply to your machine is 110 V, connect a
transformer of 110/220 V and 3000 W between the electrical connection.
Connect the product to a grounded outlet protected by a fuse complying with the values in the
“Technical Specifications” table”.