Philco PD 1046 ET, Owner'S Manual

Page: 22 / 132

Copyright © 2020, Fast ČR, a. s. Revision 12/2021
EN - 20
Program change
If you want to change the program when the
appliance is already running.
Press the
Start/Pause.
After the program is stopped, select
the required program using the Select
button.
Start the newly selected program by
pressing the Start/Pause button.
The new program will be started
during the old program.
12. The Extra Hygiene indicator
If you select the Extra Hygienic Washing function,
the washing temperature will increase to ensure
maximum hygiene. The Extra Hygiene indicator will
light up.
13. The Extra Rinsing option
As soon as you select the Extra Rinsing function,
the wash-rinse steps will be added to the selected
program, and the dishes that you remove from the
dishwasher in the end will be cleaner and shinier.
14. The Extra Drying indicator
If you select the Extra Drying option, additional
heating and drying will be added to the selected
program, and your dishes will be completely dry.
15. Washing phases indicators
The display shows the indicators corresponding to
the status of the running program. When the Drying
indicator is on, the dishwasher will remain silent
for 15 to 100 minutes, depending on the selected
program.
* Washing
* Rinsing
* Drying
* End
NOTE:
The child lock is activated/deactivated by pressing
the button (
7
) for approx. 3 seconds. When it
is activated, all the indicators will flash and the
remaining time indicator will show “CL” ( 4 ). When
deactivated, all indicators and “CL” will flash twice.
NOTE:
If you switch off the appliance after you select the
delay start time and the program starts, the delay
time will be canceled.
NOTE:
If you want to save any program as your favorite
program, press the Program Selection ( 2 ) and
the Delayed Start (
3
) buttons at the same time.
To select a favorite program, press the Program
Selection button ( 2 ) for 3 seconds.