Philco PD 1046 ET, Owner'S Manual

Page: 28 / 132

Copyright © 2020, Fast ČR, a. s. Revision 12/2021
EN - 26
AUTOMATIC ERROR MESSAGES AND THEIR SOLUTIONS
ERROR CODE
POSSIBLE
MALFUNCTION
SOLUTION
FF
Water supply
malfunction
Make sure that the water supply valve is open and that water
is flowing.
Disconnect the supply hose from the tap and clean the hose
filter.
If the error persists, contact the service center.
F5
Pressure system
malfunction
Contact the service center.
F3
Water supply
malfunction
Close the water supply valve and contact the service center.
F2
Water cannot be
drained
The drain hose and filters may be clogged.
Cancel the program.
If the error persists, contact the service center.
F8 Heating malfunction Contact the service center.
F1 Overflowing
Disconnect the appliance from the electric supply and close
the water supply valve.
Contact the service center.
FE Faulty electronic card Contact the service center.
F7 Overheating Contact the service center.
F9
Faulty partition
position
Contact the service center.
F6 Faulty heating sensor Contact the service center.
HI Very high voltage Contact the service center.
LO Very low voltage Contact the service center.
Installation and repair activities must always be performed by authorized service center representatives
in order to prevent possible risks. The manufacturer is not responsible for damage that may occur during
procedures performed by unauthorized persons. Repairs must only be performed by a technician. If a part
needs to be replaced, make sure that only original spare parts are used.
Improper repairs or using non-original spare parts can cause significant damage and expose the user to
considerable risk.
Customer service contact information can be found at the back of this manual. You can obtain original spare
parts related to the respective functions according to the relevant ecodesign order from customer service
for at least 10 years from the date on which your appliance was placed on the market within the European
Economic Area.