8.
Do not work on the POE62U Power injector or connect or disconnect cables, during periods
of lightning activity.
9.
The AC connector wire combination must be accessible at all times, as it serves as the main
disconnect device to the product.
10.
Before servicing the product, always disconnect the product from its AC source.
11.
Equipment is for Pollution degree 2 Environment.
12.
Disposal of this product should abide by all appropriate National laws and regulations.
Installation Instructions
1)
The unit is packaged fully closed with the mounting bracket pre-installed; remove from
packaging and loosen the four captive screws located at the top of the midspan so that the lid
can be lifted easily.
2)
Using a Philips screwdriver, remove the four screws holding the protective covering for
the PC Board, and the two screws for the protective covering over the AC terminal block.
3)
Connect cable glands (PGLAND750) or ¾ NPT conduit piping to the face of the
midspan. Ensure that connectors are fully installed to guarantee waterproof operation.
