POE62U Characteristics
WWW.PHIHONG.COM
INPUT:
AC Input Voltage Range
90 to 264VAC
AC Input Voltage Rating
100 to 240VAC
AC Input Current
2.5A (RMS) and 90VAC at maximum load
1.2A (RMS) and 240VAC at maximum load
AC Input Frequency
47 to 63Hz
Leakage Current
3.5mA for 254VAC, 50Hz
Max Inrush Current
50A for 115VAC at maximum load
75A for 230VAC at maximum load
OUTPUT:
Total Output Power
60W over 4 pairs at 60C
75W over 4 pairs at 50C
90W over 4 pairs at 40C
Ripple and Regulation
300mV maximum
Efficiency
70% (typical) at maximum load, and
120VAC 60Hz
ENVIRONMENTAL:
Temperature
Operation
-40 to +60°C
Non-operation
-40 to +85°C
Humidity
Operation
5 to 90%
EMI
FCC Part 15 Class B
EN55022 Class B
Isolation Test
Primary to Secondary: 4242 VDC for 1
minute, 10mA
Primary to Field Ground: 2121VDC for 1
minute, 10mA
Output to Field Ground: 2121VDC for 1
minute, 10mA
Immunity
ESD:
IEC61000-4-2 Level 3
RS:
IEC61000-4-3 Level 3
EFT:
IEC61000-4-4 Level 2
Surge:
IEC61000-4-5 Level 3
CS:
IEC61000-4-6 Level 3
Voltage Dips IEC61000-4-11
Harmonic: EN61000-3-2 Class A
Insulation Resistance
Primary to Secondary: >10M OHM
500VDC
Primary to Field Ground: >10M OHM
500VDC
FEATURES:
Over Voltage/Current, Short Circuit
Protection
The output can be shorted permanently
without damage
Indicators
LED 1: DC Good
Input Connector
3 pin terminal block with M3.5 screw
terminal; for appropriate connection use
minimum 14AWG wire and M3.5 spade lug
Output PoE Connector
RJ45
Output PoE Connection
+pins 3, 6, 4, 5 / -pins 1, 2, 7, 8
