9
1070_0_Product_Manual - October 28, 2010 8:52 AM
Entering New Password
If this is the first time seeing this page, you will
need to enter a new root password.
Type in and confirm your password and click on
Set. Retype your password in the Windows Pop-
up; Click OK.
Subsequent visits will use the username ‘root’
and the password you input.
Make sure that the
PhidgetSBC
is powered and properly
connected to your network. Make sure that the MAC address in
the Control Panel is identical with the one on the sticker on the
back of your board.
Click the PhidgetSBC tab in the Phidget Control Panel.
Double click on the PhidgetSBC device to bring up the PhidgetSBC
configuration panel in your default web browser
Testing Using Windows 2000/XP/Vista
Downloading the Phidgets drivers
Make sure that you have the current version of the Phidget library installed on your PC. If you don’t, do the
following:
Go to www.phidgets.com >> Drivers
Download and run Phidget21 Installer (32-bit, or 64-bit, depending on your PC)
You should see the
icon on the right hand corner of the Task Bar.
Running Phidgets Sample Program
Double clicking on the
icon loads the Phidget Control Panel; we will use this program to make sure that your
new Phidget works properly.
