13
1070_0_Product_Manual - October 28, 2010 8:52 AM
In the drop down menu, select the
1.
Sensor you have attached to the
analog input port 5 of the1018.
In our case we select the 1124 -
Precision Temperature Sensor.
The ambient temperature sensed by
2.
the 1124.
Formula used to convert the analog
3.
input sensorval into temperature.
Note:
Value and formula information will
vary from sensor to sensor.
Check that the box labelled
1.
Attached contains the word True.
Test the digital output by clicking
2.
on the white box to turn on the
LED. Clicking again will turn the
LED off. The bottom row shows
the status of the request, while
the top row displays the status of
the digital output as reported by
the device.
Test the digital input by
3.
disconnecting the wire end
connected to the digital input.
connector. The tick mark in the
box will go away.
Click on the Ratiometric Box if
4.
your sensor is ratiometric. Check the sensor product manual if you are not sure.
Test the analog input sensor by observing the sensor value as you activate the Phidget sensor.
5.
You can adjust the input sensitivity by moving the slider pointer.
6.
Click on Sensors to launch the Advanced Sensor Form.
7.
1
2
6
5
3
4
7
1
2
3
