150Mbps Wireless N Access Point
www.phicomm.com
28
Chapter 4: Software Configuration
DHCP Server: If you disable the server, please make sure you have another DHCP server in your
network.
Start IP Address: The first address in the IP Address pool.
End IP Address: The last address in the IP Address pool.
Lease Time: It is the time interval that server will change to use another DHCP address.
Default Gateway: (Optional) Suggest to input the IP Address of the LAN port of the Router.
Primary DNS Server: (Optional) Input the DNS IP address provided by your ISP. Or consult your
ISP.
Secondary DNS Server: (Optional) You can input the IP Address of another DNS server if your
ISP provides two DNS servers.
Note:
To use the DHCP server function of the router, please configure all computers in the LAN
as Obtain an IP Address automatically mode. This function will take effect after the router
rebooted.
Address Reservation
When you specify a reserved IP address for a PC in the LAN, that PC will always receive the same
IP address each time when it accesses the DHCP server. Reserved IP addresses could be assigned
to servers that require permanent IP settings.
IP Address: The IP address that the Router reserved.
MAC Address: The MAC Address of the PC that you want to reserve for an IP address.
Note: This function takes effect only when the DHCP service is enabled.
DHCP Client List
Here you can see the information of DHCP Clients.
