150Mbps Wireless N Access Point
www.phicomm.com
2
Chapter 1: Introduction
The front panel of the wireless Access Point includes 4 LED indicators, as explained in table
below:
LED
Status
Indication
POWER
On
Power is on
Off
Power is off
LAN
On
There is a successful connection on the LAN port
Off
There is no connection on the LAN port
Blinking
Data is being transferred over the LAN port
WLAN
On
The wireless function is enabled
Off
The wireless function is disabled
Blinking
Sending or receiving data over wireless network
WPS
On
A wireless device is successfully connected to the network by WPS function
Off
WPS function is deactivated
Blinking
A wireless device is connecting to the network by WPS function
Rear Panel
The rear panel of the wireless Access Point includes 1 power ON/OFF switch, 1 power connector,
1 LAN port, 1 Reset button, 1 WPS button and 1 antenna, as explained in table below: