Copyright @ 2014 Phicomm Europe GmbH 2014. Print for private use only.
25
2.
Insert the contact’s side of the battery first and then gently
push the battery into place.
3.
Close the battery cover.
Remove battery
1.
Make sure your device is turned off.
2.
Remove the back cover.
3.
Remove the battery from the small opening on bottom side
of the battery compartment.
REMOVE SIM CARD
1.
Make sure your device is turned off.
2.
Remove the back cover and battery.
3.
Take out the SIM card.
Install Micro SD Card
1.
Make sure your device is turned off.
2.
Remove the back cover and battery.
3.
Insert the MicroSD card into the slot with its gold contacts
facing down.
Copyright @ 2014 Phicomm Europe GmbH 2014. Print for private use only.
26
26
26
NOTICE:
Both Nano card and Micro SD card can be
installed into the right card slot, but just one at the same
time.
CHARGING THE BATTERY
1. Connect the power adapter and the USB connector of the
phone with the USB cable.
2. Plug in the power adapter to an electrical outlet to start
charging the battery.
NOTICE:
When charging the battery with the phone on,
the charging battery icon is displayed in phone’s status
bar. After the battery is fully charged, the charging battery
icon turns to a full battery icon .
OPTIMIZATION OF BATTERY POWER
Use the following tips to improve your battery performance.
Before first use charge your device 100%.
Charge the device frequently.
Disable all data connections over mobile network, if there is no
internet access.
Deactivate Bluetooth™ or WLAN if unnecessary.
Extend the interval of the synchronization frequency (e.g.
synchronization of e-mail, calendar and contacts).
BUTTONS ON PHONE PANEL
BUTTONS ON FRONT PANEL
The buttons on the front panel can perform the following
operations:
FUNCTIONS
Home Key
: Touch to return to the Home screen and open the
