Phiaton BT 150 NC, Owner'S Manual, Page: 6 / 16

6
6. PAIRING WITH A ‘BLUETOOTH DEVICE’
1) Pairing
- Turn on the Bluetooth feature with the ‘Bluetooth
Device’ you want to connect with the BT 150 NC.
- Place the BT 150 NC within 3 feet of the ‘Bluetooth
Device’ you want to connect.
- Press and hold the PLAY Button for over 2.5 seconds
with the BT 150 NC power on to enter Pairing Mode.
3 feet
Status Operation LED Indicator Vibration Notification
ON
Press and hold the CALL/
POWER button for 2 seconds
Purple light turns
on for 1 second
Vibrates once for 0.3 second
OFF
Press and hold the CALL/
POWER button for 2.5 seconds
Red light blinks
5 times
Vibrates twice for 0.3 second
※ Pairing mode will start once the power is turned on for the first time after purchase.
※ When the BT 150 NC is not in use, ensure the NC function is switched OFF. If left in the ON position, this will cause the battery
to run out.
Status LED Indicator
Connection Waiting Mode Blue light blinks twice in 6 second intervals
2) Connection Waiting Mode
- When power is turned on, ‘Connection Waiting Mode’ will start if ‘Pairing Mode’ cannot be entered or
the earphones cannot connect with ‘Bluetooth Device’.
- If the ‘Bluetooth Device’ is not connected within 5 minutes in ‘Connection Waiting Mode’, the earphones
will automatically turn off.
5. BLUETOOTH POWER ON/OFF AND EARPHONE CONNECTION WAITING MODE
1) Bluetooth Power ON/OFF
- Press and hold the [CALL/POWER] Button for 2 seconds to turn the
power on.
- When turning the power off, press and hold the [CALL/POWER]
Button for 2.5 seconds to turn off.
(While on an incoming call, you cannot power off the device.)
- When turning power on/off, there is a vibration notification that rings.
Bluetooth Power ON/OFF Button
ON: 2 Seconds
OFF: 2.5 Seconds
Left Side (while wearing BT 150 NC)