Phiaton BT 150 NC Owner'S Manual Download Page 10

10

1) Playing Music

- Shortly press the PLAY/PAUSE Button once to play music from the 
   ‘Bluetooth Device’. 
- While music is playing, shortly press the PLAY/PAUSE Button to pause 
   the playing music. The music will be played from the paused point 
   when playing music again.

10. LISTENING TO MUSIC (PLAY & CONTROL)

* SBC (Sub Band Codec) is default audio codec installed for any ‘Bluetooth Device’.
* ‘Qualcomm® aptX™ audio’ is high quality audio codec supported by Qualcomm® CSR.

Status

LED Indicator

While music is playing 

(Connection with ‘Qualcomm® aptX™ audio’)

Purple Light slowly blinks every 6 seconds

While music is playing

(Connection with SBC)

Blue Light slowly blinks every 6 seconds

2) Controlling Volume and Using Seek

- Both sides of the neckband feature a touch panel to control the volume and music tracks.
- Sweep the touch panel to control the volume of the Left side (while wearing BT 150 NC) to top (+) /
   bottom (-) to control the volume.
- Sweep the touch panel of the Right side (while wearing BT 150 NC) to go to the previous / next song.
  (You will hear the ‘beep’ signal when operating the touch panel.) 

     * When listening to music on the BT 150 NC via Bluetooth, you can also control your music and calls directly 
        from your ‘Bluetooth Device’.
     * When the battery is completely drained, you can connect the provided audio cable to hard wire to your device 
        and continue listening. (The buttons and touch panel will not function when using the optional audio cable so 
        you will have to use your ‘Bluetooth Device’ for music and call control.)

2) Controlling Volume and Using Seek

- Sweep the touch panel of the left side (while wearing BT 150 NC) to top (+) / bottom (-) to control the 
   volume.
- Sweep the touch panel of the Right side (while wearing BT 150 NC) to top ( ) / bottom ( ) to go to the 
   previous / next song. (You can hear the ‘beep’ signal during operating the touch panel) 

     * Music can be listened to through BT 150 NC by directly operating your ‘Bluetooth Device’.
     * When the battery is completely drained, you can connect the provided microphone cable to continue listening.

Right Side (while wearing BT 150 NC)

Left Side (while wearing BT 150 NC)

Right Side (while wearing BT 150 NC)

(1 Second)

: Play / Pause
: Monitor

: Press

: Brief Hold

: Press & Hold

: Pairing

(2.5 Seconds)

Summary of Contents for BT 150 NC

















Reviews: