Phiaton BT 150 NC, Owner'S Manual, Page: 12 / 16

12
12. CHANGING SOUND MODE
13. OUT OF COMMUNICATION RANGE
1) When the BT 150 NC connects with a ‘Qualcomm® aptX™ audio’ high quality sound compatible
‘Bluetooth Device’, it connects in ‘Qualcomm® aptX™ audio’ mode automatically. (If the ‘Bluetooth
Device’ cannot support ‘Qualcomm® aptX™ audio’ mode, it will be connected with SBC mode.)
Status Operation LED Indicator
‘Qualcomm® aptX™ audio’ Connect automatically Purple light turns on for 1 second
SBC mode Connect automatically Blue light turns on for 1 second
* SBC (Sub Band Codec) is default audio codec installed for any ‘Bluetooth Device’.
* ‘Qualcomm® aptX™ audio’ is high quality audio codec supported by Qualcomm® CSR.
Classification Noise Cancelling OFF Noise Cancelling ON
Continuous Talk Time Max 10.5 hours Max 6 hours
Continuous Music Play Time Max 10.5 hours Max 6 hours
Stand by Time Max 350 hours Max 16 hours
Full Charge Time About 2 hours
※ Battery use time
* The above times may differ depending on the environment in which it is used.
1) The BT 150 NC vibrates when you are out of communication
range (about 10 m/33 ft.) from the ‘Bluetooth Device’.
2) The alarm function first notifies you with a vibration for 2 seconds
and beep sound, then beep sound is repeated 5 times in 20 second
intervals.
3) If you continue to be out of range for more than 20 seconds, the
BT 150 NC will enter ‘Connection Waiting Mode’ after notifying
you with vibration and beep sounds, along with a voice prompt
of ‘Device Disconnected’.
4) If you move back into communication range before the notification
completes the fifth interval, you will stay connected to your
‘Bluetooth Device’.
5) If you do not move back into communication range until after
the notification has ended, you will need to manually reconnect
to Bluetooth.
Vibration rings for 2 seconds and beep sound, then
beep sound is repeated 5 times in 20 second intervals.