Phenix Technologies 600P Series, User Manual, Page: 9 / 26

6CP30/15-3
3-2
ELECTRICAL SET-UP
CONNECTIONS AND GROUNDING (QUICK REFERENCE)

Position set in the desired location.

Ground set by use of ground terminal on base of high voltage transformer.

Connect TX1 and TX2 cables between controls and high voltage transformer.

Connect SX1 - external interlock circuit as appropriate.

Connect return lead, provided, to low potential side of test specimen. See Ground-Guard-Return
connection instructions on following pages.

Connect high potential side of test specimen to either the 15kV (side) or 30kV (top) high voltage output.

Connect main power cord to appropriate receptacle.
(Further instructions on test connections may be found in ANSI C37.60)