40
OPTIONAL COMPONENT
Installation of MTR-G3504A or MTR-G3504C
1.
Remove a cap for the fixing screw on the panel cover for
the space for a temperature recorder. Remove the fixing
screw and open the panel cover. Remove the panel
cover by pushing the shaft on both sides outward. [Fig. 1]
2.
Attach the temperature recorder (MTR-G3504A or
MTR-G3504C) to the recorder fixing (MPR-S7) by referring
to the instruction manual enclosed with the recorder fixture.
[Fig. 2]
3.
Remove the connector cover on the unit by pushing the
lock under the cover. Connect the power supply
connector of the temperature recorder with the connector
on the unit. [Fig.3]
WARNING
Always disconnect the power supply to the unit
to
prevent electric shock or injury since the connector on the
unit is energized.
4.
Remove the cap on the port for taking out the recorder
sensor and take out the recorder sensor. Then set the
temperature recorder with the recorder fixing to the space
for a temperature recorder. [Fig. 4]
Fig. 1
Connector
Panel cover
Shaft
Fixing screw
Recorder
fixing
Fig. 2
Fig. 3
Fig. 4
