10
REFRIGERATOR COMPONENTS
Control panel components
1. Door check indicator (DOOR):
The red LED lamp is lit when the refrigerator door or freezer door is
opened.
2 minutes after the door check indicator is lit, the alarm buzzer is activated to notice the door opening.
[page 24]
2. Alarm indicator (ALARM):
The red LED lamp blinks during an alarm status. [page 24]
3. Temperature display indicator for freezer (FREEZER):
The green LED lamp is lit when the freezer
temperature is displayed on the temperature display.
4. Temperature display indicator for refrigerator (REFRIGERATOR):
The green LED lamp is lit when
the refrigerator temperature is displayed on the temperature display.
5. Temperature display:
Normally this shows the refrigerator or freezer temperature and during an
alarm status, this shows a blinking refrigerator or freezer temperature [page 24]. And an error code and
a refrigerator or freezer temperature is displayed alternately when the self diagnostic function detects any
abnormality. [page 25]
6. Up arrow key ( ):
Pressing this key for 5 seconds at temperature display mode causes the setting
mode. Pressing this key at setting mode makes the figure on the temperature display to change.
7. Scroll key ( ):
Pressing this key at setting mode makes the digit to be inputted on the temperature
display to change. Pressing this key for 5 seconds at temperature display mode causes the setting
mode for key lock.
8. Set key (SET):
Pressing this key at temperature display mode enables the temperature setting [page
14]. Pressing this is at the end of setting mode memorizes the setting.
9. Temperature display changeover key (REF./FREEZ.):
By pressing this key, the displayed
temperature is changed alternately; current refrigerator temperature and current freezer temperature.
10. Alarm buzzer stop key (BUZZER):
Pressing this key silences the alarm buzzer when the alarm
buzzer sounds. But the remote alarm is not canceled.
Temperature display mode: The status that the temperature display shows the refrigerator or freezer
temperature.
Setting mode: The status that the input on the temperature display is effective.
8
7
6
5
2
1
3
4
9
10
