37
OPERATION/ALARM LOG
*When the graph will be displayed and the graph item on the upper left of the screen is highlighted, and you
press the [Fig. 5] up/down key (
△▽
), the range of the vertical axis of the graphs will change as shown in the
table.
7. With the data item (Temp, CO
2
, or Door) on the upper left of the
display highlighted [Fig. 5], press the right key (
▷
).
▶
The date will be highlighted. [Fig. 7]
8. Use the up/down keys (
△▽
) to select the date of the data to display
in a graph.
Each time the up/down key is pressed the date will go back or forth 1
day, and the data from the
selected date will be displayed in a graph.
*If you press the enter key (ENTER) instead of the up/down keys (
△▽
),
the display will change to the Date Select screen [Fig. 8], so after using
the left/right keys (
◁▷
) to move the cursor to the digit you want to
change, change the numerical value using the up/down keys (
△▽
).
9. Press the enter key (ENTER).
▶
The data from the selected date will be displayed in a graph.
*If the entered setting value is out of the setting range, the following
screen will be displayed on the right side of the display: Press any key
on the control panel to change to the Date Select screen [Fig. 8].
Note:
· The CO
2
sensor is not stable during initializing of the Gas sensor. Therefore the CO
2
density log data may
be different from the true value.
Graph item
Display range
Temp
Default values
60°C ~ 50°C ~ 40°C
↑ ↓
50°C ~ 40°C ~ 30
℃
↑ ↓
40°C ~ 30°C ~ 20°C
↑ ↓
30°C ~ 20°C ~ 10°C
↑ ↓
20°C ~ 10°C ~ 0°C
CO
2
Default values
25% ~ 20% ~ 15%
↑ ↓
20% ~ 15% ~ 10%
↑ ↓
15% ~ 10% ~ 5%
↑ ↓
10% ~ 5% ~ 0%
Door
OP, CL
Date Select
Invalid Value
Press Any Key
DD/ MM /YY
<Right side of the display>
<Right side of the display> [Fig. 8]
Date Select
01/01/19
DD/ MM /YY
<Right side of the display> [Fig. 7]
－
‐
－
‐
－
Temp 01/Jan/19 EXP
50
℃
40
℃
30
℃
0 12 24
