Phason
70 / 98
34740001
Saving and restoring settings
You can save or restore (load) your settings and configuration from any USB drive. You can also transfer
them to any Supra Touch and set up new controls in seconds.
We recommend regularly saving your configuration and settings to a USB drive and then
keeping the drive in a safe place. This allows you to quickly set up new controls or recover
your information if you install a display kit.
The file created when saving settings to USB contains
all four settings groups
in one file.
When you load settings from USB, the control overwrites
all four settings groups
, and then
restarts. The settings group that was active before restarting will again be active.
For more information about settings groups, read
To save to USB
1.
Loosen the four screws in the Supra Touch enclosure and then gently remove the cover. Be careful not
to disconnect the ribbon cable.
2.
Insert a USB drive into the USB port on the inside of the cover.
3.
Press the
Menu
and then
Administration
.
4.
Press
Save to USB
.
5.
To save the configuration and settings, press
Yes
. To cancel and return to the menu, press
No
.
6.
Remove the USB drive.
7.
Replace the cover and then tighten the four screws.
To load from USB
1.
Loosen the four screws in the Supra Touch enclosure and then gently remove the cover. Be careful not
to disconnect the ribbon cable.
2.
Insert the USB drive containing the configuration and settings into the USB port on the inside of the
cover.
3.
Press the
Menu
and then
Administration
.
4.
Press
Load from USB
.
5.
To load the saved configuration and settings, press
Yes
. To cancel and return to the menu, press
No
.
6.
Remove the USB drive.
7.
Replace the cover and then tighten the four screws.
Summary of Contents for Supra Touch Series
Page 1: ......