Phason
11 / 98
34740001
Bottom layout
(
A
) Voltage switch:
Set the switch to the correct line voltage.
(
B
) Temperature [TEMP1 to TEMP4]:
Connect 3K Series temperature sensors for monitoring zone temperatures.
(C
) Outdoor temperature [OUT TEMP]:
Connect a 3K Series sensor for monitoring outdoor temperatures.
(
D
) Actuator feedback [ACT1 and ACT2]:
Connect the feedback potentiometers from actuators that require it.
(
E
) Humidity [ANALOG]:
Connect a Phason RHS Relative Humidity Sensor.
(
F
) Alarm relay:
Connect an external alarm system or siren.
(
G
) Not used
(
H
) Fuses [F1 to F4]:
Fuses for variable stages: F1 for VAR1, F2 for VAR2, and so on.
(
I
) Variable stages [VAR1 to VAR4]:
Connect variable speed fans or heating equipment.
(
J
) General-purpose relays [RLY1 to RLY12]:
Connect single stage (on or off) equipment to these terminals.
(
K
) Incoming power:
Connect the incoming power from the panel.
(
L
) Display cable:
Disconnect the cable during installation. Reconnect it when done.
Summary of Contents for Supra Touch Series
Page 1: ......
