18
To set up water meters
1.
In the main window, click
Settings
, and then
Water meters
.
2.
Below
Your water meters
, select the pulse counter (water meter) you want to set up.
Select™ Water displays the settings for the selected water meter
3.
Click
Edit settings
.
The
Water Monitor settings
window displays.
4.
Make the changes to the settings.
To increase or decrease the
Sample duration
, select the existing value and then enter a new
one, or click
Up
or
Down
to adjust the value.
To enable or disable the low or high alarm, below the alarm you want to change, select or
deselect
Enable... alarm
. There is a checkmark in the box when enabled.
To increase or decrease the
Number of pulses
, below the alarm you want to change, select the
existing value and then enter a new one, or click
Up
or
Down
to adjust the value.
To increase or decrease the
Consecutive fault samples
, below the alarm you want to change,
select the existing value and then enter a new one, or click
Up
or
Down
to adjust the value.
5.
Click
OK
to save the changes and return to the
Settings
window.
