69
12.4 Hasselblad 555 ELD
When using the Phase One P 65+ back with a Hasselblad 555 ELD, the
shutter release on the front of the Hasselblad must be in the “DIG” position.
If, of any reason, you have to use the shutter release in “Film” position
(hardware defect on the DIG button, etc.) You must make sure that the
Shutter latency is set to ”ZERO latency” in the P 65+ back or in the
Capture One application.
Shutter latency settings
On the Hasselblad 555 ELD the P 65+ back can be used with both
Normal and Zero latency.
P 65+ back is default set to Normal latency and should be kept at
default when used with a hasselblad 555 ELD.
To learn how to setup latency please consult the Menu mode section.
No Motor cable on 555 ELD
A motor cable is not required when using P 65+ on a Hasselblad 555
ELD body.
