22
6.0 CF Card Usage
When working with CF-cards, card readers and digital cameras it is
very important to follow a few rules, to avoid loss of data.
Phase One recommends that you test-drive all new CF cards including
the one enclosed. By doing an initial test to verify that the capture files
are stored properly on the card and can be accessed on a computer
you will avoid unpleasant surprises on location or when you return from
a job. CF cards are manufactured by other suppliers, and Phase One
cannot guarantee that the cards are not defective.
Inserting and ejecting on the P+ back
The compact flash card or microdrive is inserted in the hidden slot
located under the cover on the left hand side of the P+ back.
Insert the CF card with the brand label facing the display end of the
digital back as shown in the image.
When the CF card is fully inserted no parts are sticking out and the
cover can be closed.
To eject the card push the small button just above the card once, and
an ejecting pin will come out.
Pushing this pin all the way back in will eject the card.
Microdrives are not recommended to be used with P 65+, as the speed
and size of most microdrives by far is exceeded by a standard CF card
today.
