2
FIGURE 3
WIRING INSTRUCTION
(1) Switch off the power source or wall switch.
(2) Using a flat blade screwdriver to detach the PIR
motion sensor and power circuit part. (FIGURE
4)
FIGURE 4
(3) When connecting to one Micro Motion Sensor, the
wiring connection is shown hereunder: (FIGURE
5a)
FIGURE 5a
By connecting to two Micro Motion Sensors, the wiring
connection is indicated as below: (FIGURE 5b)
FIGURE 5b
Note:
A pulse switch (S2,S4) is connectable to the
unit, enabling manual operation.
(4) A 60mm hole should be drilled in the ceiling, put
the power circuit to the hole and secure it using to
the mounting surface using the screws provided.
Fix the PIR motion sensor to the power circuit part
by simply clicking in place (FIGURE 6).
FIGURE 6
SETTING THE LIGHTING SYSTEM
Please test the motion sensor function before testing
the IR Remote Controller.
Test Mode :
Turn the LUX control and the TIME control anti
clockwise – the
TEST
position. (FIGURE 7)
FIGURE 7
Turn on the wall switch. The light will turn on for
about one minute to warm up. During warm-up
