Chapter 10: Support
73
72
Phantom Flex4K Manual
connector pin outs
Use these schematics to build custom
cables at your own risk. Mis-wired cables
can cause serious damage to the camera,
which is not covered under warranty.
Vision Research recommends only using
cables supplied by Vision Research.
3-Pin Power
+12-28VDC (Male)
5-Pin Remote (Female)
These pin-out diagrams refer to the con-
nectors on the camera body. Part numbers
indicated are for the cable’s connector.
Main power port
3-pin Fischer part # S-104-Z-040-80
Pin
Function
1
VDC +12-28 VDC
2
CHGND Chassis Ground
3
PGND Power Ground
Remote port (for RCU and serial control)
5-pin Fischer part # S-103-A-054-130
Pin
Function
1
+24 VDC
2
PGND Power Ground
3
XRXD RS-232 Receive Data +5V maximum,
nomally limited to 16 meters
4
XTXD RS-232 Transmit Data +5V maximum,
nomally limted to 16 meters
5
IOGND2 RS-232 Ground - all the serial ports
are not isolated and should only be connected
to properly earthed equipment
Ethernet port
8-pin Fischer part # S-103-A-058-130
Pin
Function
1
ETHRXP 10/100/1000 Base-T Ethernet
Receive Positive
2
ETHRXN Ethernet Receive Negative
3
ETHTXP Ethernet Transmit Positive
4
ETHTXN Ethernet Transmit Negative
5
MDI2P Media Dependent Interface 2 Positive
6
MDI2N Media Dependent Interface 2 Negative
7
MDI3P Media Dependent Interface 3 Positive
8
MDI3N Media Dependent Interface 3 Positive
Component VF port
7-pin Fischer part# S-103-A-057-130
Pin
Function
1
GND Power Ground
2
GND Power Ground
3
PB HD Blue Channel
4
PR HD Red Channel
5
Y HD Green Channel
6
GND Power Ground
7
+12V Positive 12 VDC / 1.5 Amp
8-pin Ethernet (Female)
7-pin Component Viewfinder
(Female)
