Chapter 4: On-Camera Controls
25
24
Phantom Flex4K Manual
Press ‘Playback’ button to start playback of last take
(whether in RAM or Phantom CineMag IV).
Tap the ‘Return’ button to access previous screen.
Tap ‘Trigger’ button to jump to ‘Home’ menu. The video
will return to ‘Live’ state, unless multi-cine (partitions)
are in use.
Press button to define a new start point of the selected
RAM cine. A long press re-sets the in point.
Press to save the RAM cine to an installed CineMag IV.
Also displays the CineMag save progress.
Press button to define a new end point of the selected
cine. A long press resets the out point.
Press to play selected cine in reverse; long press to
fast reverse; longer press to increase reverse speed;
tap to pause.
Press button then Rotate the control knob to cycle
through available cines in RAM or CineMag IV.
Press to play selected cine; long press to fast forward;
longer press to increase fast forward speed; tap to
pause.
The Control knob also allows you to quickly scrub
through the selected Cine, and fine-tune the mark-in
and mark-out position. Scroll forward to play forward,
the further you scroll the faster the playback - same in
reverse.
Single frame stepping is also possible with the control
knob. In playback mode, tap the knob to switch
between single frame and 2% scrub increments.
playback screen
Mark In
B
Save
Mark Out
Reverse
Cine Select
Play forward
Navigation
Control knob
Center menu display
The center menu display in playback shows the
following parameters:
Green arrow indicates that playback mode is active.
DC voltage (with low battery indication).
Above the bar shows the frame rate, exposure and
resolution of the selected take.
Cine timeline bar with trigger point, play head position
and in/out point indicators.
Selected frame count and playback duration based
on current video settings.
Playhead position.
Scrub setting to fine tune play position (tap the select
knob to change).
A
A
B
B
C
C
D
D
D
E
E
F
F
G
G
