Chapter 9: Accessories
63
62
Phantom Flex4K Manual
The adjustable arm mounts to the viewfinder, and then
can be adjusted to the desired position on the camera
body. An HD-SDI cable and 12V power cable are also
included and connects to the front left side of the camera.
The full menu system of the Phantom viewfinder can
be found in the included documentation, or online
www.
vision
research.com/flex4K
The component viewfinder port on the right side of the
camera supplies 12V power and YPRPB component video.
The standard connector is a Fischer 7-pin, which works
with Sony HDVF30, HDVF35W (with a custom cable from
Vision Research) and the Vision Research YPRPB monitor
cable.
There is an option to substitute (factory install) the
7-pin Fischer with a Hirose connector for Panasonic HD
viewfinders.
The Flex4K ships with a blank back, and different battery
mounts are available as accessories.
Vision Research offers the following options:
- Hawk Woods mount for 26V Reel-Power
batteries
- Anton Bauer Gold mount (14.4V)
- V-Lock mount (14.4V)
To install the battery back, remove the small panel at the
back of the camera. This exposes a cable with a molex
connector, which connects to a matching molex connector
on the battery back.
Battery Mount
Once connected, attach the mount assembly to the
4 screws around the perimeter of the rear of the camera.
(Note: the Anton Bauer mount does not have a second
back panel assembly)
Connect the white Molex connectors together and place
inside the cavity.
Line up the mount to the back panel and install the
included screws to secure the mount.
Shown with standard Fischer connector.
Shown with optional Hirose connector.
