FORCED ACTION MIXER PFT MULTIMIX Overview – Operation – Spare Parts Lists
Transport by crane
23.04.2018
Page 15
23.04. 2018
14.2 Transport checklist
Inspect the goods for damage and missing parts immediately
after delivery.
If external transportation damage can be seen, proceed as follows:
Do not accept the delivery, or accept it only under reservations.
Note the damage on the transportation documents or the
delivery note of the carrier.
Submit the appropriate claim.
NOTE!
Always submit a claim for the defects as soon as
they are detected. Damage claims can only be
accepted within the applicable deadlines
for submission.
15 Transport by crane
Fig. 13: Attachment points
Attachment points
To transport using a crane, attach a rope to the attachment
eyelets (1)
Observe the following requirements:
The crane and lifting equipment must be suitable for
the package weight.
The operator must be authorised to operate the crane.
Fastening the lifting gear:
Attach ropes or belts as appropriate.
1. Ensure that the package is suspended so it is level.
Adjust for off-centre balancing points if necessary.
16 Transport in individual parts
Fig. 14: Individual parts
The mixing unit and the material hopper of the PFT MULTIMIX
can be removed from the frame with the motor for the transport
and maintenance:
1. Undo screws (1) of the mixing unit and lift the den material
hopper off the frame.
2. Make sure that the motor (2) points towards the sliding bar (3)
during assembly.
2
3
1