FORCED ACTION MIXER PFT MULTIMIX Overview – Operation – Spare Parts Lists
Cleaning
23.04.2018
Page 27
23.04. 2018
35 Cleaning
Securing against restarting
DANGER!
Danger of death due to unauthorised restarting!
When working on the machine, there is a danger of
unauthorised switching on of the electrical supply.
This puts those in the danger area at extreme risk.
– Before starting work, switch off all electrical
power supplies and secure them against being
switched back on again.
CAUTION!
Water can enter sensitive machine parts!
– Before cleaning the machine, seal all openings
where water could enter and impair the safety
and functions of the machine (e.g. electric
motors and control boxes).
– Remove all coverings completely after cleaning.
The machine must be cleaned daily after work
and before prolonged pauses:
1. Spray out the inside of the mixing hopper with
a water jet.
2. The slide guide (1) must be completely clean at all
times and lubricated slightly to ensure that it can
open and close smoothly.
3. Clean the mixing unit (2) thoroughly, ensuring it is
free of hardened and encrusted material.
4. The arms of the turbo mixing unit must be
easy to turn.
NOTE!
Do not aim the water jet directly
at electrical components, such
as the gear motor or control box.
1
2
Fig. 40: Cleaning
