PFT ZP 3 L MULTIMIX Overview – Operation – Spare Parts Lists
Check list for annual inspection by specialist
2016-07-04
7
2 Check list for annual inspection by specialist
2.1 Information service
This inspection must be carried out once a year by a
specialist in accordance with BGR 183 (German
Association for Health and Safety at Work). The machine
and control box receive an inspection label as verification of
this inspection. The inspection protocol is to be presented
on demand.
Inspection suggestions for annual expert inspection can be
downloaded.
3 Examination
3.1 Examination by machine operator
Prior to each shift, the machine operator has to examine the
effectiveness of the control and safety devices as well as the
proper fitting of the protection devices.
The safe working condition of the machine has to be
checked by the machine operator during operation.
If the safety devices show any defects or if any other defects
are detected that compromise a safe operation, the
supervisor has to be informed immediately.
In case of defects that cause harm to persons, the operation
of the machine has to be stopped to eliminate the defects.
3.2 Periodic inspection
Construction machinery has to be inspected for their safe
working condition in accordance with the operating
conditions and the operational requirements as needed,
however at least once a year by an expert.
Pressure vessels have to undergo the prescribed expert
inspections.
The inspection results have to be documented and kept at
least until the next inspection.