PFT ZP 3 L MULTIMIX Overview – Operation – Spare Parts Lists
Emptying MULTIMIX
30
2016-07-04
28.3 Opening the protective grille
Fig. 41: Safety limit switch
NOTE!
The PFT MULTIMIX is fitted with a safety limit
switch (1).
If the protective grille is opened, the machine
switches off immediately. After closing the
protective grille, the machine must be switched
on again at the main reversing switch (2).
Fig. 42: Opening the protective grille
Undo the screws (3) and open the protective grille.
Danger!
Rotating parts
Reaching into the material hopper poses a risk of
injury.
Therefore:
Before opening the protective grille, always
switch off the MULTIMIX at the main
reversing switch.
Never reach into the machine while it is
running.
28.4 Danger of crushing by protective grille
Fig. 43: Danger of crushing
Danger of crushing by protective grille!
There is a danger of crush injuries when closing
the protective grill.
– Never reach into the closing range of the
protective grille.
29 Emptying MULTIMIX
Fig. 44: Emptying MULTIMIX
1. The content of the mixing hopper is emptied using the
segment slide valve on the base of the hopper, directly into
the material hopper of the ZP 3 L.
2. Empty the hopper when the mixing unit is running. The slide
must be opened only as far as is necessary for emptying.
1
2
3