background image

1 About this manual

IMPORTANT

Read carefully before use.
Keep the manual for future consultation.

1.1 Validity

This operating instructions is a customer document of Pfeiffer Vacuum. The operating instructions de-
scribe the functions of the named product and provide the most important information for the safe use of 
the device. The description is written in accordance with the valid directives. The information in this op-
erating instructions refers to the product's current development status. The document shall remain valid 
provided that the customer does not make any changes to the product.

1.1.1 Applicable documents

Designation

Document

Declaration of conformity

A component of these operating instructions

1.1.2 Variants

These instructions are applicable for UnoLine vacuum pumps.

Pump type

Pump version

Uno 6

Standard version

Uno 6 M

M version; differs compared to the standard version by:

● Magnetic coupling

1.2 Target group

These operating instructions are aimed at all persons performing the following activities on the product:

● Transportation
● Setup (Installation)
● Usage and operation
● Decommissioning
● Maintenance and cleaning
● Storage or disposal

The work described in this document is only permitted to be performed by persons with the appropriate 
technical qualifications (expert personnel) or who have received the relevant training from Pfeiffer Vac-
uum.

1.3 Conventions

1.3.1 Instructions in the text

Usage instructions in the document follow a general structure that is complete in itself. The required ac-
tion is indicated by an individual step or multi-part action steps.

Individual action step

A horizontal, solid triangle indicates the only step in an action.

► This is an individual action step.

Sequence of multi-part action steps

The numerical list indicates an action with multiple necessary steps.

1. Step 1
2. Step 2
3. ...

About this manual

7/60

Summary of Contents for PK D07 107





























































Reviews: