13 Accessories
range of accessories for hybrid bearing turbopumps
13.1 Accessory information
Fixing materials
Type-specific assembled packages, with centering ring and seal, ensure the secure fastening of the
vacuum pump. Optionally with splinter shield or protective screen.
Power supply packs and display units
Power supply packs for optimal voltage supply of Pfeiffer Vacuum products are characterized by their
compact size and adapted power supply with maximum reliability. Display and operating units are used
to check and adjust operating parameters.
Cable and adapter
Mains, interface, connection, and extension cables provide a secure and suitable connection. Different
lengths on request
Venting accessories
A Pfeiffer Vacuum venting valve offers maximum operating and process security. Automatic control
through the integrated electronic drive unit of the turbopump.
Sealing gas supply
Sealing gas is used to protect the vacuum pump from dusty and corrosive processes, or excessive gas
throughputs. Sealing gas prevents the ingress of damaging substances into the motor and bearing area.
The supply is carried out either via a sealing gas valve or a sealing gas throttle without control.
Backing pump control
The electronic drive unit of the turbopump enables useful control of backing pumps. Depending on the
backing pump used, different operating modes are available.
Integrated pressure measurement
Evaluation and control by the integrated electronic drive unit, independently of an additional power sup-
ply.
13.2 Ordering accessories
Description
Order number
Set of stud screws for flanges with through-hole, DN 160 CF-F
PM 016 735 -T
Hexagon Screw Set for Flanges with Through-Holes, DN 160 CF-F
PM 016 691 -T
Set of stud screws for flanges with a threaded hole, DN 160 CF-F
PM 016 693 -T
Set of stud screws for flanges with through-hole, DN 160 CF-F
PM 016 735 -T
Mounting kit for HiPace with DN 160 ISO-K, including coated centering ring and
bracket screws
PM 016 375 -T
Mounting kit for DN 160 ISO-K to ISO-F, with collar flange, coated centering ring,
hexagon bolts
PM 016 950 -T
Mounting kit for DN 160 ISO-K to ISO-F, with collar flange, coated centering ring,
stud screws
PM 016 955 -T
TPS 311, power supply pack 3HU 19" rack module
PM 061 346 -T
Vibration damper for HiPace with DN 160 ISO-K/F
PM 006 492 AX
Vibration damper for HiPace DN 160 CF-F
PM 006 493 AX
TPS 310, power supply pack for wall/standard rail fitting
PM 061 342 -T
TPS 400, power supply pack 48 V DC, for wall/standard rail fitting
PM 061 343 -T
TPS 401, power supply pack 48 V DC, 19" partial plug-in 3HU
PM 061 347 -T
Mains cable 230 V AC, CEE 7/7 to C13, 3 m
P 4564 309 ZA
Accessories
54/64
