Pfeiffer Vacuum HiPace 300 P, Operating Instructions Manual

Page: 4 / 64

6 Operation 35
6.1 Commissioning 35
6.2 Operating modes 36
6.2.1 Operation without operating unit 36
6.2.2 Operation via multi-function connection "remote" 36
6.2.3 Operation via connection "E74" 36
6.2.4 Operation via Pfeiffer Vacuum display and control unit 36
6.2.5 Operation via field bus 36
6.3 Switching on the turbopump 37
6.4 Operation monitoring 37
6.4.1 Operating mode display via LED 37
6.4.2 Temperature monitoring 38
6.5 Switching off and venting 38
6.5.1 Switching off 38
6.5.2 Venting 38
7 Maintenance 40
7.1 General maintenance information 40
7.2 Checklist for inspection and maintenance 40
7.3 Replace operating fluid reservoir 41
7.3.1 Removing the operating fluid reservoir 42
7.3.2 Installing the operating fluid reservoir 43
7.4 Replacing the electronic drive unit 44
7.4.1 Removing electronic drive unit 44
7.4.2 Installing the electronic drive unit 45
7.4.3 Confirming the speed specification 46
8 Decommissioning 47
8.1 Shutting down for longer periods 47
8.2 Recommissioning 47
9 Recycling and disposal 48
9.1 General disposal information 48
9.2 Dispose of turbopumps 48
10 Malfunctions 49
11 Service solutions by Pfeiffer Vacuum 51
12 Spare parts HiPace 300 P 53
13 Accessories 54
14 Technical data and dimensions 55
14.1 General 55
14.2 Technical data 55
14.3 Substances in contact with the media 58
14.4 Dimensions 58
Declaration of conformity 60
Table of contents
4/62