Pfeiffer Vacuum HiPace 300 P Operating Instructions Manual Download | Manualshive

Page: 20 / 64

background image

4 Transportation and Storage

4.1 Transport

WARNING

Danger of serious injury due to falling objects

Due to falling objects there is a risk of injuries to limbs through to broken bones.

► Take particular care and pay special attention when transporting products manually.
► Do not stack the products.
► Wear protective equipment, e.g. safety shoes.

We recommend

Pfeiffer Vacuum recommends keeping the transport packaging and original protective cov-
er.

Instructions for safe transport

► Transport the turbopump only within the permissible temperature limits.
► Observe weight specified on the rating plate.
► Where possible, always transport or ship the turbopump in its original packaging.
► Always carry the turbopump with both hands.
► Remove the protective cover only immediately prior to installation.

4.2 Storage

We recommend

Pfeiffer Vacuum recommends storing the products in their original transport packaging.

Storing the turbopump

1. Seal all flange openings with the original protective caps.
2. Seal all other connections (e.g. venting connection) with the corresponding original parts.
3. Store the turbopump only indoors within the permissible temperature limits.
4. In rooms with humid or aggressive atmospheres: Hermetically seal the turbopump together with a

drying agent in a plastic bag.

Transportation and Storage

20/62

«
...
18
19
20
21
22
...
»

Summary of Contents for HiPace 300 P

































































Reviews:

No comments

Related manuals for HiPace 300 P

Brand: Watson-Marlow Pages: 55

Brand: Wayne Pages: 16

Aqua-Pure AP510

Brand: 3M Pages: 16

Brand: IBC Pages: 18

Brand: A.O. Smith Pages: 4

Brand: A.O. Smith Pages: 76

Brand: Larius Pages: 56

DOMINATOR Series

Brand: RBI Pages: 52

Brand: TATRA Pages: 16

FUTERA II Series

Brand: RBI Pages: 32

Brand: SAER Elettropompe Pages: 36

Brand: Waters Pages: 116

Brand: Rinnai Pages: 2

Brand: Vagner Pool Pages: 35

Brand: Little Giant Pages: 2

SMART GEYSER 2330-03

Brand: Simer Pages: 12

Brand: Jandy Pages: 72

Actun OPTI-QS Series

Brand: Wilo Pages: 364

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands